Page 1 of 1

opening ports

PostPosted: Wed Jan 27, 2016 7:00 am
by lederhosen

Is there a link anywhere as to which ports to open, and perhaps how, to be able to host missions for ROF?


Re: opening ports

PostPosted: Wed Jan 27, 2016 9:59 am
by SYN_Blackrat
I am not sure there is an explanatory how to guide, but it involves quite a bit of work here is info on the ports I am a bit behind the curve but the ports are configurable to enable more than one Dserver, but you will find the details in startup.cfg in ../Rise of Flight/data

Code: Select all
[KEY = network]
   client_download_traflimit = 1000
   client_ip = ""
   client_upload_traflimit = 1000
   downloader_port = 28100
   server_download_traflimit = 1000
   server_upload_traflimit = 1000
   tcp_port = 28000
   udp_port = 28000

Here you can adjust the up and download limits for your server, I think 1000= 1 mb so you may want to adjust those otherwise you will get rubber banding if it is too low or too high, the downloader port is to allow the mission to be downloaded by clients and of course the tcp and udp need no explanation, so in the case allow downloads on 28100 and both on 28000.